28-day free trial of EVK/Demo
A unique program offered by STMicroelectronics and Arrow to assist you, the design engineer, in selecting the best device for your next-generation products. Prior to committing your precious development tool budget to an unproven chip architecture, Arrow provides you with a large selection of leading-edge development tools for a FREE 28-day evaluation period.
Please find below the detailed descriptions of each development tools, and submit your application as needed.
6600W bi-directional PFC reference design
ESS_6K6W_PFC_2021P005-ST
Approx. 50% reduction in size vs IGBT design, High output power (6.6kW Max.), High efficiency (>98%), Digital control bidirectional output, Reinforced isolation, Workable firmware ready.
5kW 3-phase bi-directional PFC reference design
EESS_15kW_PFC_2022P001
Using 3 Level T-Type topology provided higher efficiency and lower power losses compare with traditional topologies, bidirectional power output, more pure sinewave AC output in the inversion operation.
Actuator Tower Light (IO-Link)
IO-LINK Actuator Tower Light 2021W005
This is an IO-LINK Actuator Tower Light to demonstrate how to trigger and configure the actuator tower light through the sta...
8-channel Digital Output (IO-Link)
EIO-Link 8-ChannelDigital Output Hub 2021W003
The IO-Link 8-Channel digital output solution is made up of three blocks: IO-Link transceiver...
8-channel Digital Input (IO-Link)
EIO-Link 8-ChannelDigital Input Hub 2021W002
The IO-Link 8-Channel digital input hub solution consists of a dual channel transceiver L6364, an Arm Cortex-M0+ MCU STM32G071 and a high speed digital 8-channel inputs curr...
8-channel Master (IO-Link)
EIO-Link 8-Channel Master 2021W001
The IO-Link 8-Channel solution is designed to demonstrate Arrow’s IOLM4P 4 ports master controller powered by STM32L431 SoC. 2 pieces of IOLM4P are used to implement this 8-channel solution.
KNX-HMI
KNX-HMI for PV inverter & Energy Storage system_2023P001
This reference design is a HMI (Human Machine Interface) solution to interface with Energy...
1kW Servo Motor Control
1kW SERVO 2022M001
1KW low voltage servo solution is designed on ST STSPIN32G4 platform. It shows how to realize servo speed ring, position ring, torque...
Ultra High Speed Motor Driver
Ultra High Speed Motor Driver 2021M001
This is an ultra-high speed motor driver solution especially for hair dryer application. It consists of STSTSPIN32 MCU which is integrated gate driver, it is good for compact design requirement.
Auto OLED DemoL99LDLH32 Driver/spc58 MCU
Automotive OLED Demo
This reference design represents a complete solution for OLED digital car lights. 16 OLED driver chip L99LDLH32 are used to drive 512 dot matrix pixels, with 256 brightness steps. The Arrow/ST...
Are you interested in any of the development tools?
Article Tags
