Analog Devices AD5940BCBZ-RL7 Front-end analogico
Precision analog front end including 16-bit 800 kSPS ADC, voltage DACs, 12-bit VBIAS0 output to bias potentiostat, amplifiers, accelerators, on-chip RAM and system-level power saving.
The AD5940 is a high-precision analog front end capable of potentiostat and electrochemical impedance spectroscopy, which allows for sensor measurement in both time and frequency domains. Incorporated into the AD5940 are a 16-bit 800 kSPS ADC with voltage, current and impedance measurement capability and a voltage DAC with output range of 0.2 V to 2.4 V and 12-bit VBIAS0 output to bias potentiostat. The AD5940 has multiple inbuilt analog circuitry, including a low-power/low-noise potentiostat amplifier (suitable for electrochemical applications), low-noise/low-power TIA, digital waveform generator, receive filters, complex impedance measurement engine, high-speed TIA and internal 2.5 V and 1.82 V reference voltage sources. The AD5940 also has multiple system-level power savings, including fast power-up and power-down analog blocks, programmable AFE sequencer, 6 kB internal SRAM and ultra-low-power potentiostat current consumption (6.5 μA) when powered on. Interfacing with the AD5940 is done via an SPI serial input/output port, making it compatible with a wide range of microcontrollers, and includes an interrupt controller and wake-up timer.
Waitch Video
Drawings/Paclage:
Key Features
• 16-bit, 800 kSPS ADC with voltage, current and impedance measurement capability
• 12-bit VBIAS0 output to bias potentiostat
• Amplifiers, accelerators and references (potentiostat amplifier, low-power TIA, digital waveform engine, receive filters, complex impedance measurement engine)
• 6 kB SRAM to pre-program AFE sequences
• Fully specified for operating temperature range of –40 °C to 85 °C
General Applications
• Electrochemical measurements
• Electrochemical gas sensors
• Potentiostat/amperometric/voltammetry/cyclic
• Bioimpedance applications
• Continuous glucose monitoring
Evaluation Board
YES — The AD5940 can be evaluated with the EVAL-AD5940BIOZ and EVAL-AD5940ELCZ both available from Analog Devices.
| Compliant | |
| EAR99 | |
| Active | |
| 8542.39.00.30 | |
| Automotive | No |
| PPAP | No |
| Electrochemical Measurement | |
| 1 | |
| 1 | |
| 1 | |
| 800 | |
| 16 | |
| Serial (SPI) | |
| 2.8 | |
| 3.3 | |
| 3.6 | |
| 0.56 | |
| Digital | |
| -40 | |
| 85 | |
| Tape and Reel | |
| Mounting | Surface Mount |
| Package Height | 0.31 |
| Package Width | 3.56 |
| Package Length | 4.16 |
| PCB changed | 56 |
| Standard Package Name | CSP |
| Supplier Package | WLCSP |
| 56 |
| EDA / CAD Models |
|
