Arduino Corporation Arduino Motor Shield Rev3 | A000079 Placas y kits de desarrollo de administración de potencia

L298 Motion Motor Control Motor Shield

Shop All Arduino Products HERE

Product Description

The Arduino Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently. You can also measure the current absorption of each motor, among other features. The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board.

This shield have two separate channels, called A and B, that each use 4 of the Arduino pins to choose the rotation direction, vary the speed, fast brake or sense the current that is flowing through the motor. In total there are 8 pins in use on this shield. You can use each channel separately to drive two DC motors or combine them to drive one bipolar stepper motor. The shield can supply 2 amperes per channel, for a total of 4 amperes maximum.

This shield has the 1.0 standard pinout that consist in 4 additional pins: 2 of them placed near the AREF pin, that are used for TWI communication, and the other 2 are placed near the RESET pin. The IOREF pin is used to adapt the shield to the board on which is mounted. The last one is not connected and is reserved for future uses.

Additional Information

EAGLE files: arduino_MotorShield_Rev3-reference-design.zip

Schematic: arduino_MotorShield_Rev3-schematic.pdf

Datasheet

 

456 piezas: Se puede enviar hoy

Quantity Increments of 1 Minimum 1
  • Manufacturer Lead Time:
    0 weeks
    • Price: $0.0331
    1. 1+ $0.0331
    2. 50000+ $0.0260
Arduino Motor Shield Rev3 | A000079

Arduino Motor Shield Rev3 | A000079 Arduino Corporation

$8.21 Price for 1

Arduino CorporationArduino Motor Shield Rev3 | A000079Placas y kits de desarrollo de administración de potencia

L298 Motion Motor Control Motor Shield

Shop All Arduino Products HERE

Product Description

The Arduino Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently. You can also measure the current absorption of each motor, among other features. The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board.

This shield have two separate channels, called A and B, that each use 4 of the Arduino pins to choose the rotation direction, vary the speed, fast brake or sense the current that is flowing through the motor. In total there are 8 pins in use on this shield. You can use each channel separately to drive two DC motors or combine them to drive one bipolar stepper motor. The shield can supply 2 amperes per channel, for a total of 4 amperes maximum.

This shield has the 1.0 standard pinout that consist in 4 additional pins: 2 of them placed near the AREF pin, that are used for TWI communication, and the other 2 are placed near the RESET pin. The IOREF pin is used to adapt the shield to the board on which is mounted. The last one is not connected and is reserved for future uses.

Additional Information

EAGLE files: arduino_MotorShield_Rev3-reference-design.zip

Schematic: arduino_MotorShield_Rev3-schematic.pdf

Datasheet

 

456 piezas: Se puede enviar hoy

    Total$8.21Price for 1

    • Se puede enviar hoy

      Ships from:
      Estados Unidos de América
      Date Code:
      2103+
      Manufacturer Lead Time:
      1 semana
      Country Of origin:
      Italia
      • In Stock: 456 piezas
      • Price: $8.212