STMicroelectronics STEVAL-ISA077V2 Placas y kits de desarrollo de administración de potencia

L6920D DC to DC Converter and Switching Regulator Chip 2V to 5.2V Output Demonstration Board

Especificaciones técnicas del producto

Ideal for figuring out power consumption at the design phase this STEVAL-ISA077V2 power management development kit manufactured by STMicroelectronics will exceed your needs.
  • Dev Kit Description

    The STEVAL-ISA077V2 demonstration board is based on the L6920D high efficiency step-up converter as well as the external components required for a typical application.
    Startup is guaranteed at 1 V and the device operates down to 0.6 V. The output voltage can be adjusted from 2 V to 5.2 V and two fixed output voltages (3.3 V and 5 V) are also available.
  • Dev Kit Features

    -Ready to use printed circuit board
        -CR95HF cut 1.2 multiprotocol transceiver IC
        -STM32F103CB 32-bit microcontroller
        -47 x 34 mm 13.56 MHz inductive etched antenna and tuning components
        -USB-B connector for communication with host PC and demonstration board powering
        -USB connect/disconnect jumper (must be left in default state)
        -LED indicating the presence of an RFID or NFC tag
        -Microcontroller reset button
        -JTAG connector for microcontroller firmware upgrade and debug
    -USB cable
    -Demonstration tags
        -ISO15693 tag: LRI2K mounted on a 45 x 75 mm antenna
        -ISO 15693 dual interface EEPROM memory: M24LR64-R mounted on a 15 x 15 mm double side etched antenna
    -Associated Firmware and PC software
        -On-board demonstration firmware to communicate with the host PC through the USB bus.
        -The CR95HF developement software enable discovery and useof all the functionalities of the CR95HF transceiver.
        -The M24LRXX application software is dedicated to the Dual interface EEPROM and ISO/IEC 15693 contactless tag.
  • Dev Kit Additional Information

    Application Note:
    http://www.st.com/st-web-ui/static/active/en/resource/technical/document/application_note/DM00024579.pdf

Símbolos y Huellas

2 piezas: Se puede enviar en 11 días

    Total $28.26 Precio para 1

    • Se puede enviar en 11 días

      Se envía desde:
      Estados Unidos de América
      Código de fecha:
      1624+
      Plazo de entrega del fabricante:
      0 semanas
      País de origen:
      Italia
      • En stock: 2 piezas
      • Price: $28.26
    STEVAL-ISA077V2

    STEVAL-ISA077V2 STMicroelectronics

    $28.26 Precio para 1

    STMicroelectronicsSTEVAL-ISA077V2Placas y kits de desarrollo de administración de potencia

    L6920D DC to DC Converter and Switching Regulator Chip 2V to 5.2V Output Demonstration Board

    Ideal for figuring out power consumption at the design phase this STEVAL-ISA077V2 power management development kit manufactured by STMicroelectronics will exceed your needs.
    • Dev Kit Description

      The STEVAL-ISA077V2 demonstration board is based on the L6920D high efficiency step-up converter as well as the external components required for a typical application.
      Startup is guaranteed at 1 V and the device operates down to 0.6 V. The output voltage can be adjusted from 2 V to 5.2 V and two fixed output voltages (3.3 V and 5 V) are also available.
    • Dev Kit Features

      -Ready to use printed circuit board
          -CR95HF cut 1.2 multiprotocol transceiver IC
          -STM32F103CB 32-bit microcontroller
          -47 x 34 mm 13.56 MHz inductive etched antenna and tuning components
          -USB-B connector for communication with host PC and demonstration board powering
          -USB connect/disconnect jumper (must be left in default state)
          -LED indicating the presence of an RFID or NFC tag
          -Microcontroller reset button
          -JTAG connector for microcontroller firmware upgrade and debug
      -USB cable
      -Demonstration tags
          -ISO15693 tag: LRI2K mounted on a 45 x 75 mm antenna
          -ISO 15693 dual interface EEPROM memory: M24LR64-R mounted on a 15 x 15 mm double side etched antenna
      -Associated Firmware and PC software
          -On-board demonstration firmware to communicate with the host PC through the USB bus.
          -The CR95HF developement software enable discovery and useof all the functionalities of the CR95HF transceiver.
          -The M24LRXX application software is dedicated to the Dual interface EEPROM and ISO/IEC 15693 contactless tag.
    • Dev Kit Additional Information

      Application Note:
      http://www.st.com/st-web-ui/static/active/en/resource/technical/document/application_note/DM00024579.pdf

    2 piezas: Se puede enviar en 11 días

      Total$28.26Price for 1

      • Se puede enviar en 11 días

        Ships from:
        Estados Unidos de América
        Date Code:
        1624+
        Manufacturer Lead Time:
        0 semanas
        Country Of origin:
        Italia
        • In Stock: 2 piezas
        • Price: $28.26