STMicroelectronicsLM358DT Op AmpAmplificateur opérationnel

The LM328DT is an industry standard op-amp found in many thousands of products across the world. The LM328DT incorporates two independent op-amps sharing common power rails, capable of operating on single rail supplies as well as dual rail supplies, has a wide bandwidth (unity gain) of 1.1MHz and can swing to 0 V to (Vcc+-1.5V). The low input offset voltage of 2mV, low input offset current of 2nA and the internal frequency compensation makes the LM328DT an ideal cost effective op-amp for most applications including transducer amplifiers, conventional op-amp circuits, AC amplifiers and DC amplifiers. With a maximum supply voltage of 30 V for single rail, ±15V for dual rail and a voltage gain of 100-dB the LM358DT is a versatile op-amp ready for everyday consumer applications.

Drawings / Package

Key Features

• Wide operating voltage range

  • 30V Single-rail
  • ±15V Dual-rail

• Large voltage gain of 100dB

• Low input offset voltage of 2mV

• Unity-Gain bandwidth of 1.1MHz

• Output swing to 0V

• Internal frequency compensation

General Applications

• General op-amp circuits

  • Inverting and non-inverting amplifiers
  • Summing, differentiators and integrator

• TTL Interfacing Circuitry

• Amplifiers for transducers

• Amplifiers for small voltages (greater than 2mV)

• Single rail power applications (portable equipment etc.)

Evaluation Board

No evaluation board exists for the LM358DT.  The datasheet provides examples circuits for the LM358.

LM358DT Op Amp

This general purpose amplifier LM358DT OP amp from STMicroelectronics is a simple circuit component used for signal amplification. Its typical dual supply voltage is ±3|±5|±9|±12 V, with a minimum of ±1.5 V and maximum of ±15 V. This op amp has a temperature range of 0 °C to 70 °C. This device utilizes bipolar technology. It has 2 channels per chip. This device uses one or two power supplies.