Microchip TechnologyRN-171-EKKit e schede di sviluppo RF/Wireless

The RN-171-EK is an 802.11 b/g Wi-Fi evaluation kit for the RN171 module that can be used to quickly add Wi-Fi connectivity to embedded applications.  It has the flexibility to connect directly to a PC via a standard USB interface or to embedded processors through the TTL/UART interface.  The board includes 2 convenient pushbuttons for controlling both SoftAP and WPS (Wi-Fi Protected Setup) mode without software configuration.  The status LEDs and jumpers enable rapid prototyping and integration into existing systems.

-Ultra-low power: 4 µA sleep, 40 mA Rx, 180 mA Tx at +10 dBm

-Complete on-board TCP/IP networking stac

-Configurable transmit power: 0 to +12 dBm

-UART hardware interface

-Up to 1 Mbps data rate over UART

-Powered by battery pack (2 AAA batteries) or via USB cable

-Pushbuttons for AP/WPS mode and reset signals

-Supports both Adhoc and SoftAP mode (including SoftAP for Android)

-10 general-purpose digital I/O pins

-8 analog sensor interfaces; configurable sensor power outputs 0 to 3.3V DC

-Real-time clock for wakeup and time stamping

-Wi-Fi Alliance certified for WPA2-PSK

-FCC/CE/IC certified and RoHS compliant

-RN171 evaluation board

-USB cable

User Manual:

http://ww1.microchip.com/downloads/en/DeviceDoc/rn-wifly-eval-um-ver1.32r.pdf

User Guide:

http://ww1.microchip.com/downloads/en/DeviceDoc/rn-wiflycr-ug-v1.2r.pdf