Microchip TechnologyATSAMA5D34-EK嵌入式系统开发板和套件

The SAMA5D34-EK is a full-featured evaluation platform for the Atmel SAMA5D34 embedded microprocessor. The kit consists of a main board, a computer module equipped with a SAMA5D34 processor, and a display module. It is supported by the SAMA5D3 Softpack, a free set of bare metal C examples, and is delivered with on-board demos for Linux and Qt-based GUI. The SAMA5D34-EK allows users to extensively evaluate, prototype and create applications that require graphics, audio, mass storage, networking, connectivity and more.

• Atmel SAMA5D34 embedded MPU running at 536MHz in a BGA324 package
• 4Gb DDR2, 2Gb NAND Flash, 128Mb NOR , 32Mb SPI Serial DataFlash, 512Kb EEPROM
• JLink and CDC on-board, optional JTAG test access port
• RGMII Ethernet 1Gb w/PHY
• Four-wire RS232
• Two USB 2.0 Hosts, one USB 2.0 Host/Device
• Conexant CX20548 SmartDAA for soft modem implementation
• MicroSD card slot
• MMC/MMC+/SD/SDIO/CE-ATA
• Headphone output, line in and microphone
• One 5.0” WVGA resistive TFT LCD module with four QTouch keys
• One ISI interface for connection to a CMOS sensor
• One ISI interface for connection to a CMOS sensor
• One HDMI interface
• One 10-pin connector for Atmel RZ600 ZigBee® module
• Two CAN connectors

Board

• One SAMA5D3x-MB (main board)
• One SAMA5D34-CM (CPU module board)
• One 5” WVGA display module board

Power supply

• Universal input AC/DC power supply with US, Europe and UK plug adapters
• One 3V lithium battery type CR1225

Cables

• One micro A/B-type USB cable
• One USB cable
• One RJ45 crossed cable

SAMA5D3 Series Summary

SAMA5D3 Series Complete

SAMA5D34-EK Design and Manufacturing Files

SAMA5D34-EK Design and Manufacturing Files Software

SAMA5D3 Series Evaluation Kit User Guide