Texas InstrumentsRF430CL330HTB射频/无线开发板和套件

RF430CL330H target board is used to demonstrate the capabilities of the RF430CL330H and help aid in the development process by providing a working hardware/firmware reference example for NFC operations.

Take a look at the RF430CL330H Example Code related to this tool.

THIS TOOL IS PROVIDED STRICTLY “AS IS”, “WITH ALL FAULTS”, WITHOUT WARRANTY OF ANY KIND, AND FOR EVALUATION AND TESTING PURPOSES ONLY. TI HEREBY EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESSED, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. THE ENTIRE RISK AS TO THE QUALITY, OR ARISING OUT OF THE USE OR PERFORMANCE OF THE TOOL, REMAINS WITH THE USER. IN NO EVENT SHALL TEXAS INSTRUMENTS BE LIABLE IN CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHERWISE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, THE COST OF LABOR, REQUALIFICATION, DELAY, LOSS OF PROFITS, GOODWILL, OR ANY OTHER ITEMS OF CLAIMED DAMAGE, EVEN IF TEXAS INSTRUMENTS IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

• I2C/SPI Interface
• ISO14443B Protocol
• NFC Tag Type- 4B Compliant
• 3K bytes available for NDEF message storage
• Interrupt to indicate end of read or end of write
• Through holes of all pins for debug and development
• On board antenna or optional external antenna connection (remove R3 and R4 for external antenna)

RF430CL330H Dynamic NFC Interface Transponder (Rev. B)

RF430CL330H VCORE Pin Wake Up MCU Via NFC/RFID Freq Magnetic Field

RF430CL330H Practical Antenna Design Guide

Automating Bluetooth(R) Pairing With Near-Field Communications (NFC)

RF430CL330H Target Board User's Guide (Rev. A)

Near Field Communications

Simplifying the Bluetooth® pairing experience using a dynamic NFC transponder

RF430CL330HTB Schematic and BOM

RF430CL330H NFC Forum Test Result Summary

Smart Grid Microcontroller Development Tools

RF430CL330H Example Code