STMicroelectronics STM32373C-EVAL 嵌入式系统开发板和套件

STM32F373VCT6 Microcontroller Evaluation Board 32KB RAM 256KB EEPROM/Flash

产品技术规格

If your project requires microprocessor-based functionality, this STM32373C-EVAL embedded system development board from STMicroelectronics is for you. Its eeprom/flash program memory is 256KB.
  • Dev Kit Description

    The STM32373C-EVAL evaluation board is designed as a complete demonstration and development platform for STMicroelectronics ARM Cortex-M4 core-based STM32F373VCT6 microcontroller. It features two I2Cs, three SPIs, three USARTs, one CAN, one CEC controller, one 12-bit ADC, three 16-bit sigma delta ADCs, three 12-bit DACs, internal 32-KByte SRAM and 256-KByte Flash, touch sensing slider, USB FS, and JTAG debugging support. This evaluation board can be used as a reference design for user application development but it is not considered as the final application.

  • Dev Kit Features

    • STM32F373VCT6 microcontroller
    • Four 5 V power supply options:Power jackST-LINK/V2 USB connectorUser USB connectorDaughter board
    • Audio jack connected to I2S DAC
    • Microphone connected to ADC through an amplifier
    • 2-GByte (or more) MicroSD card on SPI
    • Three components on I2C bus: temperature sensor, EEPROM and dual interface RF EEPROM
    • RS-232 communication configurable for communication of Flash loader
    • IrDA transceiver
    • 240x320 TFT color LCD connected to SPI interface
    • Joystick with 4-direction control and selector
    • Reset, Wakeup or Tamper, and Key buttons
    • 4 color user LEDs
    • 2 LEDs for MCU power range indicator
    • ECG, pressure sensor and PT100 temperature sensor connected to the 16-bit Sigma Delta ADC of STM32F373VCT6
    • Extension connectors for daughter board or wrapping board
    • MCU voltage: 3.3 V or adjustable 2.0 V - 3.6 V
    • USB FS connector
    • Touch slider
    • RTC with backup battery
    • CAN 2.0 A/B compliant connection
    • Light dependent resistor (LDR)
    • Two HDMI connectors with DDC and CEC
    • IR transmitter and receiver
    • Two ADC & DAC input and output signal connectors and one Sigma Delta ADC input signal connector
    • Potentiometer
    • JTAG/SWD and ETM trace debug support
    • Embedded ST-LINK/V2
  • Dev Kit Additional Information

Symbols and Footprints

本产品可能受出口管制,并需要额外的文件。

No Stock Available

数量 Increments of 1 最小量 1
  • Manufacturer Lead Time:
    99 星期
    • Price: $250.29
    1. 1+ $250.29
    2. 5+ $247.94
    3. 10+ $245.59
    4. 25+ $243.24
    5. 50+ $240.88
    6. 100+ $238.52
    7. 250+ $236.16
    8. 500+ $233.80
    9. 1000+ $231.43
STM32373C-EVAL

STM32373C-EVAL STMicroelectronics

STMicroelectronicsSTM32373C-EVAL嵌入式系统开发板和套件

STM32F373VCT6 Microcontroller Evaluation Board 32KB RAM 256KB EEPROM/Flash

If your project requires microprocessor-based functionality, this STM32373C-EVAL embedded system development board from STMicroelectronics is for you. Its eeprom/flash program memory is 256KB.
  • Dev Kit Description

    The STM32373C-EVAL evaluation board is designed as a complete demonstration and development platform for STMicroelectronics ARM Cortex-M4 core-based STM32F373VCT6 microcontroller. It features two I2Cs, three SPIs, three USARTs, one CAN, one CEC controller, one 12-bit ADC, three 16-bit sigma delta ADCs, three 12-bit DACs, internal 32-KByte SRAM and 256-KByte Flash, touch sensing slider, USB FS, and JTAG debugging support. This evaluation board can be used as a reference design for user application development but it is not considered as the final application.

  • Dev Kit Features

    • STM32F373VCT6 microcontroller
    • Four 5 V power supply options:Power jackST-LINK/V2 USB connectorUser USB connectorDaughter board
    • Audio jack connected to I2S DAC
    • Microphone connected to ADC through an amplifier
    • 2-GByte (or more) MicroSD card on SPI
    • Three components on I2C bus: temperature sensor, EEPROM and dual interface RF EEPROM
    • RS-232 communication configurable for communication of Flash loader
    • IrDA transceiver
    • 240x320 TFT color LCD connected to SPI interface
    • Joystick with 4-direction control and selector
    • Reset, Wakeup or Tamper, and Key buttons
    • 4 color user LEDs
    • 2 LEDs for MCU power range indicator
    • ECG, pressure sensor and PT100 temperature sensor connected to the 16-bit Sigma Delta ADC of STM32F373VCT6
    • Extension connectors for daughter board or wrapping board
    • MCU voltage: 3.3 V or adjustable 2.0 V - 3.6 V
    • USB FS connector
    • Touch slider
    • RTC with backup battery
    • CAN 2.0 A/B compliant connection
    • Light dependent resistor (LDR)
    • Two HDMI connectors with DDC and CEC
    • IR transmitter and receiver
    • Two ADC & DAC input and output signal connectors and one Sigma Delta ADC input signal connector
    • Potentiometer
    • JTAG/SWD and ETM trace debug support
    • Embedded ST-LINK/V2
  • Dev Kit Additional Information

No Stock Available

Quantity Increments of 1 Minimum 1
  • Manufacturer Lead Time:
    99 星期
    • Price: $250.29
    1. 1+$250.29
    2. 5+$247.94
    3. 10+$245.59
    4. 25+$243.24
    5. 50+$240.88
    6. 100+$238.52
    7. 250+$236.16
    8. 500+$233.80
    9. 1000+$231.43