NXP SemiconductorsMCEVALHPCN8641DPlacas y kits de desarrollo del sistema integrado
MPC8641/MC8641D Microprocessor Development Platform 1500MHz CPU 4GB RAM 8MB Flash Linux BSP
| Compliant | |
| EAR99 | |
| Obsolete | |
| 8471.50.01.50 | |
| Automotive | No |
| PPAP | No |
Dev Kit Description
HPCN is a high-performance computing, evaluation and development platform supporting the MPC8641D dual-core processor built on Power Architecture® technology, as well as the MPC8641 single-core version.
HPCN’s official designation is “HPCN”, and may be ordered using part number MCEVALHPCN-8641D.
HPCN is optimized to support the high-bandwidth memory ports for each processor core, as well as the two PCI-Express® ports, one dedicated for graphics or other slot-based cards, and the other dedicated for Linux® I/O with the ULI south-bridge.
The system is primarily a development and evaluation system, which is enhanced by its modular design, making it highly configurable.
HPCN is designed to the micro-ATX form-factor standard, allowing it to be used in 1U or 2U rack-mount chassis’, as well as in a standard ATX/Micro-ATX chassis. It is preloaded with U-boot and CodeWarrior Linux BSP.
Dev Kit Features
- Processor: MPC8641(single core) MPC8641D (dual core) at speeds of 1.0 GHz to 1.5 GHz
- DDR: DDRII 600 MHz
- ECC compatible
- Up to 4 GB of RAM
- Ethernet: Four integrated Ethernet 10/100/1000-base T ports
- I²C: Dual I²C buses, one for boot initialization and the other for DDR SPD EEPROM
- Serial: Dual RS-232 ports
- Local Bus: 8 MB flash, Promjet flash emulator, and Actel Pixis FPGA
- High-Speed Serial Interface:
- SerDes Port 1: Configured in x1/x4 PCI Express mode connected to the ULI south-bridge
- SerDes Port 2: Configurable to x1/x2/x4/x8 PCI Express mode or x1/x4 SRIO mode
- South Bridge: ULI 1575
- IDE controller for parallel and serial ATA
- Dual 2.0 USB connectors
- Bridge to dual PCI slots
- Power Supply: Dedicated unified VCORE for the processor, VTT/VREF for DDR, and general I/O power
- Debug: JTAG/COP via an onboard connector
- Configurations: Hardware and software enabled configurations
- Software Support: U-Boot bootloader, CodeWarrior Linux BSP, and DINK Debugger available
Dev Kit Additional Information
MPCxxxx Calibration, Debug and Interface Boards
P2020RDB: P2020 Reference Design Board
MCEVALHPC2-7448: High Performance Computing Platform II (HPC II)
Linux BSP for Freescale MPC8641
P4080DS: P4080 Development System
PPCEVAL-CDS-8548: Customer Development System for MPC8548E
SDKLINUX: Linux® SDK for QorIQ Processors
P4080PCIe Integrated Multicore Communications Processor Development System
HPCN — an MPC8641D Development Platform
| EDA / CAD Models |