Arrow Development ToolsBEMICRO CVCartes et kits de développement de logique programmable
5CEFA2F23C8N FPGA Development Board 24MHz/50MHz/100MHz 128MB RAM 128B/2MB EEPROM/Flash
| Supplier Unconfirmed | |
| EAR99 | |
| Unconfirmed | |
| BEMICRO CV | |
| Development Board | |
| 5CEFA2F23C8N | |
| FPGA | |
| 128B/2MB | |
| EEPROM/Flash | |
| EEPROM/Flash | |
| 128MB | |
| Yes | |
| 80 | |
| 1 | |
| No | |
| 5 | |
| 8 | |
| Quartus II | |
| 92 | |
| 48 |
Description du kit de développement
BeMicro CV adopts Altera’s 28-nm, low-cost FPGA – Cyclone V. It retains all the benefits of its predecessor including the 80-pin edge connector interface. Users can migrate their designs from BeMicro SDK to BeMicro CV easily. Besides, more user’s GPIOs are available. Moreover, it supports a hard memory controller for DDR3. Users don’t pay much attention to timing closure.
The Altera 5CEFA2F23C8N Cyclone V FPGA resident on the Be Micro CV features a hardened memory controller (HMC) that supports DDR2, DDR3 and LPDDR3. On the BeMicro CV the HMC is connected to a single 16-bit wide, 1Gb DDR3 SDRAM device.
Fonctionnalités du kit de développement
- One Cyclone V E FPGA (5CEFA2F23C8N) in a 484-pin FineLine BGA (FPGA)
-25,000 LEs
-9,434 adaptive logic modules (ALMs)
-1,760 Kbit (Kb) M10K and 196 Kb MLAB memory
-4 fractional phase locked loops (PLLs)
-50 18x18-bit multipliers
-1 Hard Memory Controller
-224 general purpose input/output (GPIO)
-1.1-V core voltage- FPGA configuration circuitry
-Active Serial (AS) x1 configuration (EPCS16I8N)
-Embedded USB-BlasterTM II for use with the Quartus® II Programmer
-Separate JTAG configuration header- Clocking circuitry
-50 MHz 1.8V oscillator
-24 MHz 2.5V oscillator- Memory
-1Gbit DDR3 SDRAM (x16)
-1K (128 x 8) Two-wire Serial EEPROM
-Micro SD card slot- General user input / output
-8 user LEDs
-User Pushbuttons
-3 User DIP switches- Prototyping
-2 Terasic 40 pin prototyping headers
-BeMicro SDK 80-pin card edge connector
-Micro SD card slot- Power via USB or via user-provided 5V supply
Complément d'information sur le kit de développement
Please note that this board is only meant for evaluation purposes. You can view our Terms and Conditions of Sale here.
| EDA / CAD Models |