Microchip TechnologyMCP73871DM-VPCCCartes et kits de développement de gestion de la puissance
MCP73871 Battery Management 4.179V to 4.224V Output Demonstration Board
| Supplier Unconfirmed | |
| EAR99 | |
| Active | |
| 8542.33.00.01 | |
| Automotive | No |
| PPAP | No |
| Demonstration Board | |
| Battery Management | |
| 4.179 to 4.224 | |
| 5VDC(Typ) | |
| MCP73871 |
Description du kit de développement
The MCP73871 Demo Board with Voltage Proportional Current Control is designed to demonstrate Microchip's stand-alone linear Li-Ion battery charger with system power path and load sharing management control solution. The MCP73871 integrates the required elements to meet design challenges when developing new Li-Ion / Li-Polymer batteries powered products.The MCP73871 Demo Board with Voltage Proportional Current Control is designed to deliver minimum 1.5A total current to system load and to a single cell Li-Ion battery at 4.2V preset voltage regulation (4.1V, 4.35V and 4.4V options are also available for MCP73871). The board has a dip switch helping to decides the input power source between AC-DC wall adapter and USB port (AC/USB) and control input current limits, enable charge timer and enable charging.
Fonctionnalités du kit de développement
-Integrated System Load Sharing-Input Current Limit Control hardware selected (typical 1650 mA, USB-High-Three LEDs to indicate charge status, low battery and power good signal-Preset Li-Ion battery charge voltage: 4.2V ± 0.5%-Temperature monitoring (is disabled by default)-Factory preset 0.1C preconditioning current of deeply depleted cells-Factory preset Safety Timer with Timer Enable feature-Constant Current/Constant Voltage (CC/CV) charge algorithm-Resistor programmed maximum charge current: 1A-Resistor programmed termination set point: 100 mA-Automatic Charge Termination-Automatic Recharge-Internal Thermal RegulationComplément d'information sur le kit de développement
Technical Document:Selector Guide:User Guide:
| EDA / CAD Models |