Arduino Corporation A000073 | Arduino Uno Rev3 SMD 組み込みシステム開発ボードおよびキット

ATMEGA328 Microcontroller Uno SMD Development Board 16MHz CPU 2KB RAM 1KB/32KB EEPROM/Flash

Shop All Arduino Products HERE

Product Description

The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter

With a 16 MHz clock speed, it's able to perform instruction commands efficiently. Its 32 kB Flash memory gives it enough room for most sketches/code to upload into the Arduino Uno.

This is the SMD version. This version has the ATmega chip is surface mounted to the board, so the chip cannot be easily replaced, unlike the original where the chip can be easily pulled out and replaced. Performance will be the same as the original. Click here if you're looking for the DIP version.

Ready to scale your Arduino Uno design? Get the ATmega328P here!

Features

    - Microcontroller: ATmega328
    - Operating Voltage: 5V
    - Input Voltage (recommended): 7-12V
    - Input Voltage (limits): 6-20V
    - Digital I/O Pins: 14 (of which 6 provide PWM output)
    - Analog Input Pins: 6
    - DC Current per I/O Pin: 40 mA
    - DC Current for 3.3V Pin: 50 mA
    - Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
    - SRAM: 2 KB (ATmega328)
    - EEPROM: 1 KB (ATmega328)

Additional Information:

DFU Mode

Reference Design

Schematic

Arduino Software (download)

86 個の部品 : 4 日後に発送

    Total $51.38 Price for 2

    • 4 日後に発送

      Ships from:
      アメリカ合衆国
      Date Code:
      +
      Manufacturer Lead Time:
      0 週間
      Country Of origin:
      イタリア
      • In Stock: 86 部分
      • Price: $25.69
    A000073 | Arduino Uno Rev3 SMD

    A000073 | Arduino Uno Rev3 SMD Arduino Corporation

    $25.69 Price for 2

    Arduino CorporationA000073 | Arduino Uno Rev3 SMD組み込みシステム開発ボードおよびキット

    ATMEGA328 Microcontroller Uno SMD Development Board 16MHz CPU 2KB RAM 1KB/32KB EEPROM/Flash

    Shop All Arduino Products HERE

    Product Description

    The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

    The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter

    With a 16 MHz clock speed, it's able to perform instruction commands efficiently. Its 32 kB Flash memory gives it enough room for most sketches/code to upload into the Arduino Uno.

    This is the SMD version. This version has the ATmega chip is surface mounted to the board, so the chip cannot be easily replaced, unlike the original where the chip can be easily pulled out and replaced. Performance will be the same as the original. Click here if you're looking for the DIP version.

    Ready to scale your Arduino Uno design? Get the ATmega328P here!

    Features

        - Microcontroller: ATmega328
        - Operating Voltage: 5V
        - Input Voltage (recommended): 7-12V
        - Input Voltage (limits): 6-20V
        - Digital I/O Pins: 14 (of which 6 provide PWM output)
        - Analog Input Pins: 6
        - DC Current per I/O Pin: 40 mA
        - DC Current for 3.3V Pin: 50 mA
        - Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
        - SRAM: 2 KB (ATmega328)
        - EEPROM: 1 KB (ATmega328)

    Additional Information:

    DFU Mode

    Reference Design

    Schematic

    Arduino Software (download)

    86 個の部品 : 4 日後に発送

      Total$51.38Price for 2

      • 4 日後に発送

        Ships from:
        アメリカ合衆国
        Date Code:
        +
        Manufacturer Lead Time:
        0 週間
        Country Of origin:
        イタリア
        • In Stock: 86 部分
        • Price: $25.69