| RoHS Not Applicable | |
| EAR99 | |
| Active | |
| SVHC | Yes |
| SVHC Exceeds Threshold | Yes |
| Automotive | No |
| PPAP | No |
| Evaluation Board | |
| Battery Management | |
| 1 | |
| 800(Max) | |
| 4.45VDC to 6.45VDC | |
| BQ24091 |
Dev Kit Description
BQ24091EVM describes the bq24091 evaluation module (EVM), how to perform a stand-alone evaluation or interface with a host or system. The charger is designed to deliver up to 1000mA of continuous current to the battery output when programmed with a resistor on the ISET pin and is programmed at the factory for ~540mA. The USB current limit modes are selected by the ISET2 pin and limits current to a maximum of 500mA (logic high) or 100mA (float or high impedance). A low on the ISET2 pin programs the charge current using the ISET resistor.
Dev Kit Additional Information
1 A, Single-Input, Single-Cell Li-Ion and Li-Pol Battery Charger (Rev. E)
1 A, Single-Input, Single-Cell Li-Ion and Li-Pol Battery Charger (Rev. C)
Selecting the Best bq2404x/5x/9x Single Cell Battery Charger for your Applicatio
1.0-A Single-Input, Single-Cell Li-Ion Battery Charger .
1.0-A Single-Input, Single-Cell Li-Ion Battery Charger (Rev. A)
| EDA / CAD Models |