Microchip TechnologyDM330021-2組み込みシステム開発ボードおよびキット

The dsPICDEM MCLV-2 Development Board provides a cost-effective method of evaluating and developing sensored or sensorless Brushless DC (BLDC) and Permanent Magnet Synchronous motor control applications. The board supports Microchips 28-pin SOIC and a variety of Plug-In Modules with dsPIC33F/E Digital Signal Controllers. With the MCLV-2 either the internal, on chip OpAmps or the external OpAmps on the MCLV-2 board can be used. Microchip provides PIMs for using either the internal or external OpAmps. The MCLV-2 is fully backwards compatible with the original MCLV and all MC PIMs. The board is capable of controlling motors rated up to 48V and 15Amps. This board is designed to work with the 24V BLDC Motor (AC300020) and the 24V motor power supply (AC002013) to create a complete 24V BLDC development kit. This board also supports multiple communications channels such as USB, CAN, LIN and RS-232.

The dsPICDEMTM MCLV-2 Development Board is targeted to control a Brushless DC (BLDC) motor or Permanent Magnet Synchronous Motor (PMSM) in sensor or sensorless operation. This flexible and cost-effective board can be configured in different ways for use with Microchip’s specialized motor control digital signal controllers. The dsPICDEMTM MCLV-2 Development Board supports the dsPIC33E or dsPIC33F motor control device family. It offers a mounting option to connect either a 28-pin SOIC device or a generic 100-pin Plug-In Module (PIM).

• Motor Control Interfaces:
  • Three-phase inverter bridge with a power rating of 48V/15A 
  • Ability to use internal OpAmps found on certain dsPIC33E devices or external OpAmps on the MCLV-2 board for current sensing 
  • Hall sensors/quadrature encoder interface for sensored motor control 
  • Phase voltage feedback for sensorless BLDC operation 
  • DC bus current sense resistor for single shunt vector control 
  • Phase current sense resistor for dual shunt vector control 
  • Overcurrent protection 
  • Input/output control switches 
  • Potentiometer 
  • LED indicator for PWM outputs
  Power Supply Connectors: 
  
  • Auxiliary power tab “fast-on” connectors for the controller and power stage 
  • 24V power input connector for the controller 
  • Dedicated power input connector for the power stage

  Communication Interfaces: 

  • CAN interface port 
  • LIN interface port 
  • UART communication via USB 
  • UART communication via RS-232

  Programming Interfaces: 

  • ICSP™ connector for programming a dsPIC DSC device 
  • RJ11 connector for programming a dsPIC DSC device 
  • ICSP connector for programming the PIC18LF2450 USB to UART bridge

  Full Backwards Compatibility with MCLV

• dsPICDEM MCLV-2 Development Board
• dsPIC33EP256MC506 Internal OpAmp PIM
• Matrix board to configure the MCLV-2 for internal, on chip OpAmp use
• Matrix board to configure the MCLV-2 for external, on board OpAmp use

Quick Guide to Microchip Development Tools

Updated USB Driver for win2k, xp, vista

dsPICDEM MCLV Development Board User's Guide

Motor Control and Drive Brochure

dsPIC33FJ256MC710 100-pin to 100-pin TQFP Plug-In Module (PIM) Information Sheet

Real-Time Data Monitor User's Guide

AC300020 - 24V 3-Phase Brushless DC Motor

Part Number: AC300022 - 24V 3-Phase Brushless DC Motor with Encoder DataSheet

Hurst DMB0224C10002 BLDC Motor DataSheet

Technical Notice ETN 33

Real Time Data Monitor User's Guide

Low-cost Motor Control and Sensor Designs with PIC MCUs and dsPIC DSCs

dsPICDEM MCLV-2 (DM330021-2) Development Board User's Guide

AN957 - Sensored BLDC Motor Control Using dsPIC30F2010

AN1017 - Sinusoidal Control of PMSM Motors with dsPIC30F / dsPIC33F/ dsPIC33E DSC

AN1078 - Sensorless Field Oriented Control of a PMSM

AN1078 - Sensorless Field Oriented Control of a PMSM

AN1292 - Sensorless Field Oriented Control (FOC) for a Permanent Magnet Synchronous Motor (PMSM)Using a PLL Estimator and Field Weakening (FW)