NXP SemiconductorsDEMO9S08JS16嵌入式系统开发板和套件
MC9S08JS16 Microcontroller Development Board
| Compliant | |
| EAR99 | |
| Active | |
| 8471.50.01.50 | |
| Automotive | No |
| PPAP | No |
| Development Board | |
| MC9S08JS16 | |
| Microcontroller | |
| 2 | |
| 1 | |
| Yes |
Dev Kit Description
DEMO9S08JS16 is a cost-effective demonstration kit enabling quick MC9S08JS16 evaluation. The kit includes a DEMOJM base board and a DC9S08JS16 daughter card and can be used to demonstrate the features of the MC9S08JS16 device, starting with the on-chip USB 2.0 full-speed device controller and transceiver. Built-in USB-BDM circuitry is available for debugging and programming, serial communication and simple logic analyzer.
Dev Kit Features
-On-board Logic Analyzer-On-board Virtual Serial Port-Four (4) asymmetrically positioned 8x2 male connectors for interchangeable daughter cards-P&E’s Embedded Multilink circuitry populated on the underside-SCI signals connected to P&E’s Embedded Multilink through jumpers-ON/OFF Power Switch w/ LED indicator-A 6VDC to 8VDC power supply input barrel connector-Power Input Selection Jumpers for selecting the input voltage source:-Power Input from Embedded Multilink to LDO regulator-Power Input from DC Power Jack to LDO regulator-Power Input from Mini-AB connector-Power Input from MCU_PORT connector-RESET Push Button and LED indicator w/ Enable-User Features:-USB device mode and host mode support with Mini-AB USB connector-CAN Module w/Enable-3-axis Accelerometer w/Enable-8 User LED’s w/ Enable-4 User Push Buttons w/ Enable-1 Piezo Buzzer w/ Enable-IIC Pullups w/ Enable-10K Ohm POT w/ Enable-Specifications:-Board Size 3.5 x 4.0-Daughter Card Size 1.4 x 1.5-Power Input:-USB Cable: 5VDC, 500mA max-DC Power Jack: 2.5/5.5mm barrel connector, 6VDC to 8VDC Center PositiveDev Kit Additional Information
Technical Document
http://cache.freescale.com/files/microcontrollers/doc/user_guide/DEMO9S08JS16QSG.pdf?fpsp=1
| EDA / CAD Models |