NXP SemiconductorsTDA8950J/N1,112音频放大器
Audio Amp Speaker 1-CH Mono/2-CH Stereo 340W Class-D 23-Pin DBS23P Bulk
| EAR99 | |
| Obsolete | |
| 8542.33.00.01 | |
| SVHC | Yes |
| SVHC超标 | Yes |
| Automotive | No |
| PPAP | No |
| Speaker | |
| Class-D | |
| 0.05%@4Ohm@1W | |
| Differential|Single | |
| 1-Channel Mono|2-Channel Stereo | |
| 9200(Min) | |
| ±12.5 | |
| ±35 | |
| ±40 | |
| 75@±35V | |
| Dual | |
| 170x2@4Ohm|340x1@8Ohm | |
| -40 | |
| 85 | |
| Bulk | |
| Mounting | Through Hole |
| Package Height | 12.2(Max) |
| Package Width | 4.6(Max) |
| Package Length | 30.4(Max) |
| PCB changed | 23 |
| Supplier Package | DBS23P |
| 23 |
Amplify and buffer audio signals by implementing this TDA8950J/N1,112 class D amplifier from NXP Semiconductors to drive a low impedance, inductive speaker load. This audio amplifier can handle a current up to 9200(Min) mA. It has a single input signal and a differential and single output signal. It has a maximum load resistance of 8 Ohm. It has a 1-channel mono|2-channel stereo output. Its typical dual supply voltage is ±35 V, with a minimum of ±12.5 V and maximum of ±40 V. This audio amplifier has a minimum operating temperature of -40 °C and a maximum of 85 °C. This device uses dual power supplies.
| EDA / CAD Models |