LM3423BS2LYEV, Evaluation Board using LM3423 boost current regulator, high frequency PWM dimming
Reference Design using part LM3423MH by Texas Instruments
Associated Documents
For End Products
- Automotive and Transportation
- Illumination
- Indoor & Outdoor Lighting
Description
- LM3423BS2LYEV, Evaluation Board using LM3423 NFET controller used with a boost current regulator. It is designed to drive 9 to 12 LEDs at a maximum average LED current of 700mA from a DC input voltage of 10 to 26V. It is including PWM dimming, overvoltage protection and input under-voltage lockout. It also has a connector footprint (J7) which can mate with an external LED load board allowing for the LEDs to be mounted close to the driver. Alternatively, the LED+ and LED- banana jacks can be used to connect the LED load
Key Features
-
Input Voltage10 to 26 V
-
Output Voltage3.5 V
-
Output Current0.7 A
-
Number of Derived Elements9 to 12
Featured Parts (4)
Part Number | Manufacturer | Type | Description | |||
---|---|---|---|---|---|---|
|
LM3423MHX/NOPB | Texas Instruments | LED Drivers | LED Driver 12 Segment 20-Pin HTSSOP EP T/R | Buy | |
|
LM3423MH/NOPB | Texas Instruments | LED Drivers | LED Driver 12 Segment 20-Pin HTSSOP EP Tube | Buy | |
|
LM3423MHX/NOPB | Texas Instruments | LED Drivers | LED Driver 12 Segment 20-Pin HTSSOP EP T/R | Buy | |
|
LM3423MH/NOPB | Texas Instruments | LED Drivers | LED Driver 12 Segment 20-Pin HTSSOP EP Tube | Buy |