Small, efficient PoL converters for automotive applications

In this article by Tu Bui, senior marketing and application marketer at Diodes Incorporated, learn how and why the electrical systems in today’s vehicles must reduce heat dissipation and electricity consumption to meet the demands of current technology.

Vehicle electrical systems need to be small enough to fit wherever needed, while maintaining suitable performance and flexibility. To give one example, the automotive industry is increasingly looking for small form factor solutions for panel displays. This then requires compact designs and high efficiency from power components, such as point of load (PoL) converters in distributed power architectures.

Another demand on these converters is the requirement to cope with a range of input voltages, so that they can be used in 12V-, 24V-, and 48V-based automotive systems. Designers also want to minimize external component count, where possible, and so components must be suitable for the harsh environments and extended temperature ranges that they are likely to experience in a vehicle.

To help meet these requirements, Diodes Incorporated has introduced two new synchronous buck converters. Targeted at automotive PoL applications, the AP66200Q and AP66300Q offer excellent power efficiency, a wide operating voltage range, and a small footprint.

The two PoL converters are automotive-compliant and deliver highly efficient step-down conversion in vehicle powertrain, telematics, infotainment, and lighting systems. They cover a wide input voltage range—from 3.8V to 60V. The AP66200Q provides a continuous load current of up to 2A, and the AP66300Q similarly provides up to 3A.

To increase flexibility for designers, the converters can be easily configured to operate in either pulse frequency modulation (PFM) or pulse width modulation (PWM) modes. When in PFM mode, efficiency is improved at light loads; operating in PWM mode will result in low ripple across all loads. As a result, designers can choose between a high-efficiency operation or a smaller system design.

The two PoL converters have a low quiescent current (IQ) of only 40μA in PFM mode, which improves the light-load efficiency, and enables the converters to meet the <100µA standby requirements of many automotive applications. They also have an ultra-low 2.2μA shutdown current. Their low on-state resistance (RDS(ON)) and enhanced efficiency modes allow for low internal power dissipation to maximize efficiency and avoid heat dissipation problems.

Both devices have adjustable switching frequency capabilities (up to 2.5MHz) and can be synchronized to an external clock. Additionally, the soft-start pin is programmable to reduce inrush current and for various power sequencing schemes.

As they are highly integrated, board layout is simplified and PCB space requirements are reduced, with minimal need for external components. This also helps reduce the overall bill of materials (BOM) cost.

The converters are AEC-Q100 Grade 1 qualified, manufactured in IATF 16949 certified facilities, and support PPAP documentation. They are supplied in compact 16-pin U-QFN4040-16/SWP (Type UXB) packages that support automatic optical inspection (AOI).

Where efficiency, flexibility, and simplicity are all on the must-have list, PoL converters such as the AP66200Q and AP66300Q enable automotive designers to meet all their power system requirements.


최신 뉴스

Sorry, your filter selection returned no results.

개인정보 보호정책이 업데이트되었습니다. 잠시 시간을 내어 변경사항을 검토하시기 바랍니다. 동의를 클릭하면 Arrow Electronics 개인정보 보호정책 및 이용 조건에 동의하는 것입니다.

당사의 웹사이트에서는 사용자의 경험 향상과 사이트 개선을 위해 사용자의 기기에 쿠키를 저장합니다. 당사에서 사용하는 쿠키 및 쿠키 비활성화 방법에 대해 자세히 알아보십시오. 쿠키와 추적 기술은 마케팅 목적으로 사용될 수 있습니다. '동의'를 클릭하면 기기에 쿠키를 배치하고 추적 기술을 사용하는 데 동의하는 것입니다. 쿠키 및 추적 기술을 해제하는 방법에 대한 자세한 내용과 지침을 알아보려면 아래의 '자세히 알아보기'를 클릭하십시오. 쿠키 및 추적 기술 수락은 사용자의 자발적 선택이지만, 웹사이트가 제대로 작동하지 않을 수 있으며 사용자와 관련이 적은 광고가 표시될 수 있습니다. Arrow는 사용자의 개인정보를 존중합니다. 여기에서 당사의 개인정보 보호정책을 읽을 수 있습니다.