DN05045/D, based on NSIC2030B 1-10 V PWM Dimming for CCR Lighting Circuits
Reference Design using part NSI50010Y by onsemi
Image
1 / 1
For End Products
- Lighting Dimmer
Description
- DN05045/D, Reference Design features a dimmable LED circuit using pulse width modulation (PWM). The dimming circuitry uses two comparators to adjust the brightness of the LEDs. Comparator A (U1-A) generates a Resistor-Capacitor (RC) wave that has a minimum of 1 Vdc and a maximum of 10 Vdc. Comparator B (U1-B) takes the generated RC wave (Vcompare) and compares it with the 1-10 Vdc input (Vdim) of the analog dimmer. When the 1-10 Vdc dimming is set to 1 Vdc or less, then the LEDs are off. When it is set to 10 Vdc, the LEDs will be completely on
Key Features
-
Input Voltage15 V
-
Output Power3.45 W
-
Number of Derived Elements3
Featured Parts (3)
| Part Number | Manufacturer | Type | Description | |||
|---|---|---|---|---|---|---|
|
NSI50350ADT4G | onsemi | LED Drivers | LED Driver 80 Segment 3-Pin(2+Tab) DPAK T/R | Buy | |
|
LM2903DR2G | onsemi | Linear Comparators | Comparator Dual ±18V/36V 8-Pin SOIC N T/R | Buy | |
|
NSI50010YT1G | onsemi | LED Drivers | LED Driver 3 Segment Automotive 2-Pin SOD-123 T/R | Buy | |