DC2060A, Demonstration Board using LTC4229 Single Ideal Diode and Hot-Swap Controller
使用 Analog Devices 的 LTC4229IUFD 的参考设计
Image
1 / 1
相关文件
依据最终产品
- Industrial Networking
- Power Supplies
- Servers
- Telecom Infrastructure
说明
- DC2060A, Demonstration Board using LTC4229 Single Ideal Diode and Hot-Swap Controller. The main components of this circuit are two series connected N channel MOSFETs, a power sense resistor, a few passive components, nine jumpers for selection of alternative operation modes, and four LEDs for visual indication of the controller signals. One of the MOSFETs operates as an ideal diode and the other one as a Hot-Swap power switch. The DC2060A circuit is assembled to operate with a 12V supply and 10A maximum current load. The operating voltage can be easily readjusted for any voltage between 2.9V and 18V
主要特色
-
Input Voltage2.9 to 18 V
-
Output Current9 A
Featured Parts (2)
| 零件编号 | 供应商 | 类别 | 说明 | |||
|---|---|---|---|---|---|---|
|
LTC4229IUFD#TRPBF | Analog Devices | Hot Swap Controllers | Hot Swap Controller 1-CH 18V N-Channel Positive Low Voltage 24-Pin QFN EP T/R | 买入 | |
|
|
LTC4229IUFD#PBF | Analog Devices | Hot Swap Controllers | Hot Swap Controller 1-CH 18V N-Channel Positive Low Voltage 24-Pin QFN EP Tube | 买入 | |