ADL5375-15-EVALZ, Evaluation Board based on ADL5375, 1500 mV, 400 MHz to 6 GHz Quadrature Modulator

説明

• ADL5375-15-EVALZ, Evaluation Board is a fully populated, 4-layer, FR4-based for the ADL5375. For normal operation, it requires a 5 V/500 mA power supply. The 5V power supply should be connected to the clip leads labeled VPOS and GND. The LO and baseband inputs (which should be biased at 1.5 V) are applied to edge-mounted SMA-type RF connectors. The ADL5375 output drives the ADL5320 driver amplifier with its output is available at the SMA connector labeled AMP_OUT. The ADL5375 output can be accessed directly at the SMA connector labeled AMP_IN/SMA_OUT (remove R2 and install zero ohms in R1). The evaluation board also includes options to drive the LO differentially through a balun along with pads that can be used to implement a harmonic filter in the LO path