EVAL-L9301, Evaluation Board based on L9301 Multiple Configurable H/LSD
Diseño de referencia usando la pieza L9301 de STMicroelectronics
이미지
1 / 2
Documentos asociados
Para productos finales
- ABS, Solenoid Driver
Descripción
- EVAL-L9301, Evaluation Board designed to evaluate L9301, a smart power device mainly for ABS valves applications. L9301 is able to drive electronic on-off valves with or without external freewheeling diode. The OUT1-8 can be driven by parallel input in PWM mode or SPI command. Through the SPI it is possible to configure the device parameters like configuration, Slew-rate, Overcurrent threshold, to send the drivers EVAL-L9301 commands and to read back the diagnosis results. The device is protected against over temperature, open load, short to GND and short to Vbattery condition. The overcurrent diagnostics can be set in latched or unlatched mode for each channel
Características clave
-
Input Voltage4.75 to 5.25 V
Piezas destacadas (3)
| Número de pieza | Fabricante | Tipo | Descripción | |||
|---|---|---|---|---|---|---|
|
MC7805CDTG | onsemi | Linear Regulators | Standard Regulator Pos 5V 1A 3-Pin(2+Tab) DPAK Tube | AÑADIR AL CARRITO | |
|
L9301-TR | STMicroelectronics | Power Switches | Power Switch Hi Side/Lo Side 8-OUT 0.3Ohm Automotive AEC-Q100 36-Pin PowerSSO EP T/R | AÑADIR AL CARRITO | |
|
|
L9301 | STMicroelectronics | Power Switches | Power Switch Hi Side/Lo Side 8-OUT 0.3Ohm Automotive AEC-Q100 36-Pin PowerSSO EP T/R | AÑADIR AL CARRITO | |