DC1847A, Demonstration Board using LTC3607EMSE Dual 600 mA, 15 V Monolithic Synchronous Step-Down Regulator
Diseño de referencia usando la pieza LTC3607EMSE de Analog Devices
이미지
1 / 1
Documentos asociados
Para productos finales
- Automotive and Transportation
- Li-Ion Battery Charger
- Servers
Descripción
- DC1847A, Demonstration Board using LTC3607EMSE Dual 600 mA, 15 V Monolithic Synchronous Step-Down Regulator. The DC1847 has an input voltage range of 4.5V to 15V, with each regulator capable of delivering up to 600mA of output current. The DC1847 can operate in either Burst Mode or pulse-skipping mode. In shut-down, the DC1847 can run off of less than 1 uA total. The DC1847 is a very efficient circuit, up to 90%. The DC1847 uses the 16 Pin MSOP LTC3607 package, which has an exposed pad on the bottom-side of the IC for good thermal performance
Características clave
-
Conversion TypeDC to DC
-
Input Voltage4.5 to 15 V
-
Output Voltage1.2|1.5|1.8|2.5|3.3|5 V
-
Output Current0.6 A
-
Efficiency90 %
-
TopologyBuck
Piezas destacadas (2)
| Número de pieza | Fabricante | Tipo | Descripción | |||
|---|---|---|---|---|---|---|
|
LTC3607EMSE#PBF | Analog Devices | DC to DC Converter and Switching Regulator Chip | Conv DC-DC 4.5V to 15V Synchronous Step Down Dual-Out 0.6V to 15V 0.6A 16-Pin MSOP EP Tube | AÑADIR AL CARRITO | |
|
|
LTC3607EMSE#TRPBF | Analog Devices | DC to DC Converter and Switching Regulator Chip | Conv DC-DC 4.5V to 15V Synchronous Step Down Dual-Out 0.6V to 15V 0.6A 16-Pin MSOP EP T/R | AÑADIR AL CARRITO | |