PMP10507, LM5175 Four Switch Buck-Boost Variable Input, Variable Output Design
Diseño de referencia usando la pieza LM5175PWP de Texas Instruments
이미지
1 / 2
Documentos asociados
Para productos finales
- Automotive and Transportation
- LED Lighting
- Power Supplies
- USB Power Management
Descripción
- PMP10507, LM5175 Four Switch Buck-Boost Variable Input, Variable Output Design. PMP10507 is configured for 35Vin and was tested at a range of 17 to 54Vout. This design utilizes the LM5175, which is a wide VIN range Single Inductor, four switch synchronous Buck-Boost controller. This design is capable of regulating the output while the input is at, above or below the output. The switching frequency is set to 200 kHz. This Design is optimized for a regulated input of 35V and the output is adjusted from 17V to 54V out for a Pout max of 170W. The output voltage was adjusted by changing the bottom feedback resistor
Características clave
-
Conversion TypeDC to DC
-
Input Voltage35 V
-
Output Voltage17 to 57 V
-
Output Current7 A
-
Output Power170 W
-
TopologyBuck
Piezas destacadas (3)
| Número de pieza | Fabricante | Tipo | Descripción | |||
|---|---|---|---|---|---|---|
|
LM5175PWPR | Texas Instruments | DC to DC Controllers | DC/DC Cntrlr Single-OUT Step Down/Step Up 600kHz 28-Pin HTSSOP EP T/R | AÑADIR AL CARRITO | |
|
|
LM5175PWPT | Texas Instruments | DC to DC Controllers | DC/DC Cntrlr Single-OUT Step Down/Step Up 600kHz 28-Pin HTSSOP EP T/R | AÑADIR AL CARRITO | |
|
|
LM5175PWPTQ1 | Texas Instruments | DC to DC Controllers | DC/DC Cntrlr Single-OUT Step Down/Step Up 600kHz 28-Pin HTSSOP EP T/R | AÑADIR AL CARRITO | |