ADL5240-EVALZ, Evaluation Board based on ADL5240 100 to 4000 MHz RF/IF Digitally Controlled VGA
Using Part
Vignette
1 / 2
Documents connexes
Pour les produits finaux
- Automatic Test Equipment
- RF/IF Gain Stages
- Wireless Infrastructure
Description
- ADL5240-EVALZ, Evaluation Board is a fully populated, 4-layer, Rogers 3003-based for the ADL5240. For normal operation, it requires a 5 V/200 mA power supply. The evaluation board can be programmed through the USB port of a PC running Windows XP or Vista with Microsoft .NET Framework 3.5 installed. The DSA and the amplifier can be individually biased to the clip leads labeled VCC, VDD and GND as well as connected to the VDD plane using R2 and R1. The evaluation board can be configured with AMP-driving-DSA or DSA-driving-AMP using the available resistor and capacitor pads
Caractéristiques principales
-
Operating Frequency100 to 4000 MHz
Pièces en vedette (2)
| Pièce numéro | Fabricant | Type | Description | |||
|---|---|---|---|---|---|---|
|
24LC32A-I/MS | Microchip Technology | EEPROM | EEPROM Serial-I2C 32K-bit 4K x 8 3.3V/5V 8-Pin MSOP Tube | Ajouter au panier | |
|
24LC64-I/SN | Microchip Technology | EEPROM | EEPROM Serial-I2C 64K-bit 8K x 8 3.3V/5V 8-Pin SOIC N Tube | Ajouter au panier | |