PMP5317.2, Flyback (-3.3V@10mA) for Seismic
Using Part
Vignette
1 / 1
Documents connexes
Pour les produits finaux
- Industrial
Description
- PMP5317.2, Flyback (-3.3V@10mA) for Seismic. Reference design provides isolated 7V, +3.3V, and -3.3V outputs at 100mW total power from a 2.6Vdc to 5.1Vdc input. With total power loss below 40mW, the full load efficiency is over 70%. The minimum load losses are kept below 25mW. The TPS43000 is used to control this multiple-output flyback converter. The entire circuit fits onto a 1 square inch, single-sided circuit board
Caractéristiques principales
-
Conversion TypeDC to DC
-
Input Voltage2.6 to 5.1 V
-
Output Voltage-3.3 V
-
Output Current0.01 A
-
Output Power0.033 W
-
TopologyFlyback- Non Sync
Pièces en vedette (4)
| Pièce numéro | Fabricant | Type | Description | |||
|---|---|---|---|---|---|---|
|
TLV431AIDBZRG4 | Texas Instruments | Voltage References | V-Ref Adjustable 1.24V to 6V 15mA 3-Pin SOT-23 T/R | Ajouter au panier | |
|
|
TLV431AIDBZR | Texas Instruments | Voltage References | V-Ref Adjustable 1.24V to 6V 15mA 3-Pin SOT-23 T/R | Ajouter au panier | |
|
TPS43000PW | Texas Instruments | DC to DC Controllers | DC/DC Cntrlr Single-OUT Step Up 1100kHz 16-Pin TSSOP Tube | Ajouter au panier | |
|
|
TPS43000PWR | Texas Instruments | DC to DC Controllers | DC/DC Cntrlr Single-OUT Step Up 1100kHz 16-Pin TSSOP T/R | Ajouter au panier | |