PRT-15353, SparkFun Nano Power Timer Development Kit based on TPL5110
Using Part
Vignette
1 / 4
Documents connexes
Pour les produits finaux
- Clock and Timing Devices
Description
- PRT-15353, SparkFun Nano Power Timer will run while only consuming minimal power (approximately 35nA) and turn your project on after a set amount of time. When you are done polling your sensors, posting data to the web, writing to your logger, or planning world domination, your microcontroller can tell the Nano Power Timer to turn off the power. No more running your microcontroller all day when you only want to read the ambient temperature once per hour. The TPL5110 delay is configured with the use of resistors. We've added a six-way DIP switch to select one of the five preinstalled resistors. The sixth switch is attached to a pad to add your own PTH (or SMD) resistor. The delays associated with the pre-installed headers are shown on the bottom of the board for quick setup
Pièces en vedette (4)
| Pièce numéro | Fabricant | Type | Description | |||
|---|---|---|---|---|---|---|
|
TPL5110DDCR | Texas Instruments | Timers | Standard Timer Single -40°C 105°C 6-Pin TSOT-23 T/R | Ajouter au panier | |
|
|
TPL5110QDDCTQ1 | Texas Instruments | Timers | Standard Timer Single -40°C 125°C Automotive AEC-Q100 6-Pin TSOT-23 T/R | Ajouter au panier | |
|
|
TPL5110QDDCRQ1 | Texas Instruments | Timers | Standard Timer Single -40°C 125°C Automotive AEC-Q100 6-Pin TSOT-23 T/R | Ajouter au panier | |
|
|
TPL5110DDCT | Texas Instruments | Timers | Standard Timer Single 6-Pin TSOT-23 T/R | Ajouter au panier | |