TPS2410EVM, Evaluation Module using TPS2410 controls an N-channel MOSFET to operate in circuit as an ideal diode
Using Part
Vignette
1 / 4
Pour les produits finaux
- Blade Server
- Power Supplies
- Telecom Infrastructure
Description
- TPS2410EVM, is an Evaluation module set up to wire-OR two power supplies for redundant power to a load using two TPS2410s and MOSFETs. A 5 V supply is used to power status LEDs. It is jumper selected to power VDD on the TPS2410 and the glitch circuit if the control voltage is less than 3.0 V. The status outputs turn on LEDs to give a visual condition of the system, fault, power good, and gate status
Caractéristiques principales
-
Conversion TypeDC to DC
-
Input Voltage5 V
Pièces en vedette (3)
| Pièce numéro | Fabricant | Type | Description | |||
|---|---|---|---|---|---|---|
|
TPS2410PWR | Texas Instruments | OR Controllers | OR Controller N-Channel Single 14-Pin TSSOP T/R | Ajouter au panier | |
|
|
TPS2410PWRG4 | Texas Instruments | OR Controllers | OR Controller N-Channel Single 14-Pin TSSOP T/R | Ajouter au panier | |
|
|
TPS2410PW | Texas Instruments | OR Controllers | OR Controller N-Channel Single 14-Pin TSSOP Tube | Ajouter au panier | |