Understanding Different Power Connector Types

Power connectors complete circuits by joining an electrical component to its power source. For consumer electronics, the connector usually refers to the junction where the product “plugs in” to a battery or, more commonly, to a power source in the wall. Some types of electrical connectors carry both power and data, but power connectors have a more specialized purpose: they allow electronic devices to operate.

Power Connector Types Explained

The variety of power connectors on the market reflects their many differences in construction, orientation, and purpose. Some connectors can resist physical damage from water, shock, or vibration; some can only tolerate a limited number of connections and disconnections before they are likely to fail.

We differentiate power connectors by:

Duration of connection (temporary or permanent)

- Location of conductive interfaces (male or female)

- Type of current (alternating or direct)

- Assembly and removal method

Power Connector Pinouts and Wiring

For a power connector to perform its function correctly, it must have the correct pinout. The pinout is the arrangement of connections each connector can make within a circuit. Each wire attaches to a corresponding contact, or pin, in the connecting component. Because the wires may have different uses and properties, it is essential to the functioning of the connector and the entire circuit that each pin matches to the correct contact.

Manufacturers use several different methods to make these wire connections, such as:

Soldering

- Piercing or displacing the insulating material around the contacts

- Wire wrapping

Choosing the appropriate connection method depends on the connectors’ terminations. The termination exposes the pins just enough to complete a circuit, but not enough to create a connection that is dangerous, vulnerable to damage by normal usage, or likely to be disconnected by accident.

Keyed and Polarized Connectors

Incorrectly connected pins may risk damaging the electrical components. To prevent a faulty connection, some connectors feature special mechanical adaptations that only allow the connector to connect to the pinout’s correct match, angle, and orientation. These connectors are called “keyed” or “polarized” connectors.

Here are a few essential hardware components of power connectors:

Jack: a female connector that receives a pin or blade to complete a circuit.

Blade: a flat, conductive piece of metal that fits inside a blade receptacle to complete a circuit.

Pin: a male conductive cylinder that fits into a jack as part of a connection.

Socket: a jack or connecting receptacle that is typically the least movable part of the connector.

Plug: a termination that may contain multiple jacks, pins, or blades. The plug fits into a socket.

Actualité

Sorry, your filter selection returned no results.

Nous avons mis à jour notre politique de confidentialité. Prenez un moment pour lire les changements. En cliquant sur "J'accepte", vous acceptez la clause de confidentialité d'Arrow Electronics ainsi que les conditions d'utilisation.

Notre site Internet place des cookies sur votre appareil pour améliorer votre expérience et pour améliorer notre site. Pour en savoir plus sur les cookies que nous utilisons et la façon de les désactiver, cliquez ici. Des cookies et des technologies de suivi peuvent être utilisés à des fins de marketing. En cliquant sur « Accepter », vous consentez au placement de cookies sur votre appareil et à notre utilisation de technologies de suivi. Cliquez sur « En savoir plus » pour de plus amples informations et instructions sur la façon de désactiver les cookies et les technologies de suivi. Même si l'acceptation des cookies et technologies de suivi est volontaire, leur désactivation peut entraîner un mauvais fonctionnement du site Internet et certaines publicités peuvent être moins pertinentes pour vous. Nous respectons votre confidentialité. Lisez notre politique de confidentialité ici.