DN06040/D - Universal Input, 20W, LED Ballast Design Note
Progetto di riferimento usando la parte NCP1351BDR2G di onsemi
Immagine
1 / 4
Per prodotti finali
- Solid state lighting
Per contattare il Servizio Clienti.
- DN06040/D, Design Note for the NCP1351 controller provides for a low cost, variable frequency, flyback converter. It incorporates a very low quiescent current allowing for high value resistors to be used as a start-up circuit direct from the HV rail. The design comprises and input filter, bridge rectifier (using low cost 1N4007 diodes), bulk capacitors and line inductor in filter arrangement, the power stage, rectifier diode and smoothing capacitors. Feedback is CVCC, constant current drive for the LED's with a constant voltage in the event of an open circuit output. In order not to need PFC the input power is capped at 25W, so assuming 80% efficiency the maximum output power is 20W
Funzioni principali
-
Input Voltage85 to 265 (AC) V
-
Output Voltage33 V
-
Output Current0.7 A
-
Output Power20 W
-
Number of Derived Elements8